ZyXEL Communications ZyXEL ZyAIR 100 - Manual (Page 374)

ZyWALL 10~100 Series Internet Security Gateway
27-12 Remote Node Setup
Figure 27-8 Menu 11.1: Remote Node Profile
To configure traffic redirect properties, press [SPACE BAR] to select Yes in the Edit Traffic Redirect
field and then press [ENTER].
Table 27-5 Menu 11.1: Remote Node Profile (Traffic Redirect Field)
FIELD DESCRIPTION EXAMPLE
Edit
Traffic
Redirect Press [SPACE BAR] to select Yes or No.
Select No (default) if you do not want to configure this feature.
Select Yes and press [ENTER] to configure Menu 11.6 — Traffic Redirect
Setup.
Yes
Press [ENTER] at the message “Press ENTER to Confirm...” to save your configuration, or press [ESC] at
any time to cancel.
27.5.1 Traffic Redirect Setup
Configure parameters that determine when the ZyWALL will forward WAN traffic to the backup gateway
using Menu 11.6 — Traffic Redirect Setup.
Menu 11.1 - Remote Node Profile
Rem Node Name= ? Route= IP
Active= Yes
Encapsulation= Ethernet Edit IP= No
Service Type= Standard Session Options:
Service Name= N/A
Edit Filter Sets= No
Outgoing:
My Login= N/A
My Password= N/A Edit Traffic Redirect= Yes
Retype to Confirm= N/A
Server IP= N/A
Press ENTER to Confirm or ESC to Cancel.