ZyXEL Communications ZyXEL ZyAIR 100 - Manual (Page 365)

ZyWALL 10~100 Series Internet Security Gateway
Remote Node Setup 27-3
Figure 27-2 Menu 11.1: Remote Node Profile for Ethernet Encapsulation
The following table describes the fields in this screen.
Table 27-1 Fields in Menu 11.1
FIELD DESCRIPTION EXAMPLE
Rem Node
Name Enter a descriptive name for the remote node. This field can be up
to eight characters. LAoffice
Active Press [SPACE BAR] and then [ENTER] to select Yes (activate
remote node) or No (deactivate remote node). Yes
Encapsulation Ethernet is the default encapsulation. Press [SPACE BAR] and then
[ENTER] to change to PPPoE or PPTP encapsulation. Ethernet
Service Type Press [SPACE BAR] and then [ENTER] to select from Standard,
RR-Toshiba (RoadRunner Toshiba authentication method) or RR-
Manager (RoadRunner Manager authentication method). Choose
one of the RoadRunner methods if your ISP is Time Warner's
RoadRunner; otherwise choose Standard. Standard
Service Name If you are using PPPoE encapsulation, then type the name of your
PPPoE service here. Only valid with PPPoE encapsulation. poellc
Outgoing
My Login This field is applicable for PPPoE encapsulation only. Enter the
login name assigned by your ISP when the ZyWALL calls this
remote node. Some ISPs append this field to the Service Name
field above (e.g., jim@poellc) to access the PPPoE server.
jim
Menu 11.1 - Remote Node Profile
Rem Node Name= ChangeMe Route= IP
Active= Yes
Encapsulation= Ethernet Edit IP= No
Service Type= Standard Session Options:
Service Name= N/A Edit Filter Sets= No
Outgoing:
My Login= N/A
My Password= N/A Edit Traffic Redirect= No
Retype to Confirm= N/A
Server IP= N/A
Press ENTER to Confirm or ESC to Cancel: