ZyXEL Communications ZyXEL ZyAIR 100 - Manual (Page 293)

ZyWALL 10~100 Series Internet Security Gateway
Log Screens 19-7
Figure 19-3 Reports
Enabling the ZyWALL’s reporting function decreases the overall throughput by
about 1 Mbps.
The following table describes the fields in this screen.
Table 19-3 Reports
LABEL DESCRIPTION
Report Type Use the drop-down list box to select the type of reports to display.
Web Site Hits displays the web sites that have been visited the most often from the
LAN and how many times they have been visited.
Protocol/Port displays the protocols or service ports that have been used the most
and the amount of traffic for the most used protocols or service ports.
LAN IP Address displays the LAN IP addresses to and /or from which the most traffic
has been sent and how much traffic has been sent to and from those IP addresses.
Start Collection/
Stop Collection The button text shows Start Collection when the ZyWALL is not recording report data
and Stop Collection when the ZyWALL is recording report data.
Click Start Collection to have the ZyWALL record report data.
Click Stop Collection to halt the ZyWALL from recording more data.
Refresh Click Refresh to update the report display. The report also refreshes automatically
when you close and reopen the screen.