ZyXEL Communications ZyXEL ZyAIR 100 - Manual (Page 316)

ZyWALL 10~100 Series Internet Security Gateway
21-2 Introducing the SMT
For your first login, enter the default password “1234”. As you type the password, the screen displays an “X”
for each character you type.
Please note that if there is no activity for longer than five minutes after you log in, your ZyWALL will
automatically log you out and display a blank screen. If you see a blank screen, press [ENTER] to bring up
the login screen again.
Figure 21-2 Password Screen
21.3 Navigating the SMT Interface
The SMT is an interface that you use to configure your ZyWALL.
Several operations that you should be familiar with before you attempt to modify the configuration are listed
in the table below.
Table 21-1 Main Menu Commands
OPERATION KEYSTROKES DESCRIPTION
Move down to
another menu [ENTER] To move forward to a submenu, type in the number of the desired
submenu and press [ENTER].
Move up to a
previous menu [ESC] Press the [ESC] key to move back to the previous menu.
Move to a
“hidden” menu Press [SPACE BAR]
to change No to Yes
then press [ENTER]. Fields beginning with “Edit” lead to hidden menus and have a
default setting of No. Press [SPACE BAR] to change No to Yes,
and then press [ENTER] to go to a “hidden” menu.
Move the cursor [ENTER] or
[UP]/[DOWN] arrow
keys
Within a menu, press [ENTER] to move to the next field. You can
also use the [UP]/[DOWN] arrow keys to move to the previous and
the next field, respectively.
Entering
information Fill in, or press
[SPACE BAR], then
press [ENTER] to
select from choices. You need to fill in two types of fields. The first requires you to type in
the appropriate information. The second allows you to cycle through
the available choices by pressing [SPACE BAR].
Required fields All fields with the symbol must be filled in order be able to save
the new configuration.
Enter Password : XXXX