ZyXEL Communications ZyXEL ZyAIR 100 - Manual (Page 243)

ZyWALL 10~100 Series Internet Security Gateway
Remote Management Screens 16-5
Figure 16-3 FTP
The following table describes the fields in this screen.
Table 16-2 FTP
LABEL DESCRIPTION
Server Port You may change the server port number for a service if needed, however you must
use the same port number in order to use that service for remote management.
Server Access Select the interface(s) through which a computer may access the ZyWALL using this
service.
Secured Client
IP Address A secured client is a “trusted” computer that is allowed to communicate with the
ZyWALL using this service.
Select All to allow any computer to access the ZyWALL using this service.
Choose Selected to just allow the computer with the IP address that you specify to
access the ZyWALL using this service.
Apply Click Apply to save your customized settings and exit this screen.
Reset Click Reset to begin configuring this screen afresh.
16.5 Configuring WWW
To change your ZyWALL’s World Wide Web settings, click REMOTE MANAGEMENT, then the WWW
tab. The screen appears as shown.