ZyXEL Communications ZyXEL ZyAIR 100 - Manual (Page 423)

ZyWALL 10~100 Series Internet Security Gateway
SNMP Configuration 32-1
Chapter 32
SNMP Configuration
This chapter explains SNMP configuration menu 22.
SNMP is only available if TCP/IP is configured.
32.1 SNMP Configuration
To configure SNMP, enter 22 from the main menu to display Menu 22 - SNMP Configuration as shown
next. The “community” for Get, Set and Trap fields is SNMP terminology for password.
Figure 32-1 Menu 22: SNMP Configuration
The following table describes the SNMP configuration parameters.
Table 32-1 SNMP Configuration Menu Fields
FIELD DESCRIPTION EXAMPLE
Get Community Type the Get community, which is the password for the incoming
Get- and GetNext requests from the management station. Public
Set Community Type the Set community, which is the password for incoming Set
requests from the management station. Public
Trusted Host If you enter a trusted host, your ZyWALL will only respond to
SNMP messages from this address. A blank (default) field means
your ZyWALL will respond to all SNMP messages it receives,
regardless of source. 0.0.0.0
Menu 22 - SNMP Configuration
SNMP:
Get Community= public
Set Community= public
Trusted Host= 0.0.0.0
Trap:
Community= public
Destination= 0.0.0.0
Press ENTER to Confirm or ESC to Cancel: