ZyXEL Communications ZyXEL ZyAIR 100 - Manual (Page 242)

ZyWALL 10~100 Series Internet Security Gateway
16-4 Remote Management Screens
Table 16-1 Telnet
LABEL DESCRIPTION
Server Port You may change the server port number for a service if needed, however you must
use the same port number in order to use that service for remote management.
Server Access Select the interface(s) through which a computer may access the ZyWALL using this
service.
Secured Client
IP Address A secured client is a “trusted” computer that is allowed to communicate with the
ZyWALL using this service.
Select All to allow any computer to access the ZyWALL using this service.
Choose Selected to just allow the computer with the IP address that you specify to
access the ZyWALL using this service.
Apply Click Apply to save your customized settings and exit this screen.
Reset Click Reset to begin configuring this screen afresh.
16.4 Configuring FTP
You can upload and download the ZyWALL’s firmware and configuration files using FTP, please see the
chapter on firmware and configuration file maintenance for details. To use this feature, your computer must
have an FTP client.
To change your ZyWALL’s FTP settings, click REMOTE MANAGEMENT, then the FTP tab. The screen
appears as shown.