ZyXEL Communications ZyXEL ZyAIR 100 - Manual (Page 442)

ZyWALL 10~100 Series Internet Security Gateway
34-2 Firmware and Configuration File Maintenance
This is a sample FTP session showing the transfer of the computer file " firmware.bin" to the ZyWALL.
ftp> get rom-0 config.cfg
This is a sample FTP session saving the current configuration to the computer file “config.cfg”.
If your (T)FTP client does not allow you to have a destination filename different than the source, you will
need to rename them as the ZyWALL only recognizes “rom-0” and “ras”. Be sure you keep unaltered
copies of both files for later use.
The following table is a summary. Please note that the internal filename refers to the filename on the
ZyWALL and the external filename refers to the filename not on the ZyWALL, that is, on your computer,
local network or FTP site and so the name (but not the extension) may vary. After uploading new firmware,
see the ZyNOS F/W Version field in Menu 24.2.1 - System Maintenance - Information to confirm that
you have uploaded the correct firmware version. The AT command is the command you enter after you
press “y” when prompted in the SMT menu to go into debug mode.
Table 34-1 Filename Conventions
FILE TYPE INTERNAL
NAME
EXTERNAL NAME DESCRIPTION
Configuration
File Rom-0 This is the configuration filename on the ZyWALL.
Uploading the rom-0 file replaces the entire ROM file
system, including your ZyWALL configurations,
system-related data (including the default password),
the error log and the trace log. *.rom
Firmware Ras This is the generic name for the ZyNOS firmware on
the ZyWALL. *.bin
34.3 Backup Configuration
The ZyWALL displays different messages explaining different ways to backup,
restore and upload files in menus 24.5, 24.6, 24. 7.1 and 24.7.2 depending on
whether you use the console port or Telnet.
Option 5 from Menu 24 - System Maintenance allows you to backup the current ZyWALL configuration
to your computer. Backup is highly recommended once your ZyWALL is functioning properly. FTP is the