ZyXEL Communications ZyXEL ZyAIR 100 - Manual (Page 358)

ZyWALL 10~100 Series Internet Security Gateway
26-4 Internet Access
Figure 26-2 Internet Access Setup (PPTP)
The following table contains instructions about the new fields when you choose PPTP in the Encapsulation
field in menu 4.
Table 26-2 New Fields in Menu 4 (PPTP) Screen
FIELD DESCRIPTION EXAMPLE
Encapsulation Press [SPACE BAR] and then press [ENTER] to choose PPTP. The
encapsulation method influences your choices for the IP Address field. PPTP
Idle Timeout This value specifies the time, in seconds, that elapses before the
ZyWALL automatically disconnects from the PPTP server. 100
(default)
26.4 Configuring the PPPoE Client
If you enable PPPoE in menu 4, you will see the next screen. For more information on PPPoE, please see the
Reference Guide.
Menu 4 - Internet Access Setup
ISP's Name= ChangeMe
Encapsulation= PPTP
Service Type= N/A
My Login= username
My Password= ******
Idle Timeout= 100
IP Address Assignment= Dynamic
IP Address= N/A
IP Subnet Mask= N/A
Gateway IP Address=N/A
Network Address Translation= SUA Only
Press ENTER to Confirm or ESC to Cancel: