ZyXEL Communications ZyXEL ZyAIR 100 - Manual (Page 138)

ZyWALL 10~100 Series Internet Security Gateway
9-16 NAT
Table 9-7 Trigger Port
LABEL DESCRIPTION
Start Port Type a port number or the starting port number in a range of port numbers.
End Port Type a port number or the ending port number in a range of port numbers.
Trigger The trigger port is a port (or a range of ports) that causes (or triggers) the ZyWALL to
record the IP address of the LAN computer that sent the traffic to a server on the WAN.
Start Port Type a port number or the starting port number in a range of port numbers.
End Port Type a port number or the ending port number in a range of port numbers.
Apply Click Apply to save your changes back to the ZyWALL.
Reset Click Reset to begin configuring this screen afresh.