ZyXEL Communications ZyXEL ZyAIR 100 - Manual (Page 463)

ZyWALL 10~100 Series Internet Security Gateway
System Maintenance & Information 35-3
Table 35-1 Valid Commands
aux These commands display dial backup information and control dial backup connections.
ip These commands display IP information and configure IP settings.
ipsec These commands display IPSec information and configure IPSec settings.
bridge These commands display bridge information.
bm These commands configure bandwidth management settings and display bandwidth
management information.
8021x These commands configure 802.1x settings and display 802.1x information.
35.2 Call Control Support
The ZyWALL provides two call control functions: budget management and call history. Please note that
this menu is only applicable when Encapsulation is set to PPPoE or PPTP in menu 4 or menu 11.1.
The budget management function allows you to set a limit on the total outgoing call time of the ZyWALL
within certain times. When the total outgoing call time exceeds the limit, the current call will be dropped
and any future outgoing calls will be blocked.
Call history chronicles preceding incoming and outgoing calls.
To access the call control menu, select option 9 in menu 24 to go to Menu 24.9 - System Maintenance -
Call Control, as shown in the next table.
Figure 35-3 Call Control
Menu 24.9 - System Maintenance - Call Control
1.Budget Management
2.Call History
Enter Menu Selection Number: