ZyXEL Communications ZyXEL ZyAIR 100 - Manual (Page 326)

ZyWALL 10~100 Series Internet Security Gateway
22-2 SMT Menu 1 – General Setup
Table 22-1 General Setup Menu Field
FIELD DESCRIPTION EXAMPLE
Domain Name Enter the domain name (if you know it) here. If you leave this field
blank, the ISP may assign a domain name via DHCP. You can go to
menu 24.8 and type "sys domain name" to see the current domain
name used by your router.
The domain name entered by you is given priority over the ISP
assigned domain name. If you want to clear this field just press
[SPACE BAR] and then [ENTER].
zyxel.com.tw
Edit Dynamic
DNS Press [SPACE BAR] and then [ENTER] to select Yes or No (default).
Select Yes to configure Menu 1.1: Configure Dynamic DNS
discussed next. No
(default)
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to Confirm…” to
save your configuration, or press [ESC] at any time to cancel.
22.2.1 Configuring Dynamic DNS
To configure Dynamic DNS, go to Menu 1: General Setup and press [SPACE BAR] to select Yes in the
Edit Dynamic DNS field. Press [ENTER] to display Menu 1.1— Configure Dynamic DNS (shown next).
Not all models have every field shown.
Figure 22-2 Configure Dynamic DNS
Follow the instructions in the next table to configure Dynamic DNS parameters.
Menu 1.1 - Configure Dynamic DNS
Service Provider= WWW.DynDNS.ORG
Active= Yes
DDNSType= DynamicDNS
Host1=
Host2=
Host3=
EMAIL=
USER=
Password= ********
Enable Wildcard= No
Offline= N/A
Edit Update IP Address:
Use Server Detected IP= Yes
User Specified IP Address=No
IP Address=N/A
Press ENTER to confirm or ESC to cancel: