ZyXEL Communications ZyXEL ZyAIR 100 - Manual (Page 309)

ZyWALL 10~100 Series Internet Security Gateway
Maintenance 20-9
Figure 20-10 Reset Warning Message
You can also press the RESET button on the rear panel to reset the factory defaults of your ZyWALL. Refer
to the Hardware Installation chapter for more information on the RESET button.
20.5.2 Backup Configuration
Backup Configuration allows you to backup (save) the current system (ZyWALL) configuration to your
computer. Backup is highly recommended once your ZyWALL is functioning properly.
Click Backup to save your current ZyWALL configuration to your computer.
20.5.3 Restore Configuration
Restore Configuration allows you to restore a previously saved configuration file from your computer to your
ZyWALL.
Table 20-4 Restore Configuration
LABEL DESCRIPTION
File Path Type in the location of the file you want to upload in this field or click Browse ... to find it.
Browse...
Click Browse... to find the file you want to upload. Remember that you must decompress
compressed (.ZIP) files before you can upload them.
Upload Click Upload to begin the upload process.
Do not turn off the device while configuration file upload is in progress.
After you see a “configuration upload successful” screen, you must then wait one minute before logging into
the device again.