ZyXEL Communications ZyXEL ZyAIR 100 - Manual (Page 58)

ZyWALL 10~100 Series Internet Security Gateway
3-12 Wizard Setup
Table 3-6 WAN Setup
LABEL DESCRIPTION
Gateway IP Address Enter the gateway IP address in this field if you selected Use Fixed IP
Address. This field is not available when you select PPPoE encapsulation in
the previous wizard screen.
DNS Server Address
Assignment DNS (Domain Name System) is for mapping a domain name to its
corresponding IP address and vice versa, e.g., the IP address of
www.zyxel.com is 204.217.0.2. The DNS server is extremely important because
without it, you must know the IP address of a machine before you can access it.
Get automatically from
ISP Select this option if your ISP does not give you DNS server addresses. This
option is selected by default.
Use fixed IP address -
DNS Server IP Address
Select this option If your ISP provides you a DNS server address.
Primary/Secondary
DNS Server
If you selected the Use fixed IP address – Primary/Secondary DNS Server
option, enter the provided DNS addresses in these fields.
WAN MAC Address The MAC address field allows you to configure the WAN port's MAC Address by
either using the factory default or cloning the MAC address from a computer on
your LAN.
Factory Default Select this option to use the factory assigned default MAC Address.
Spoof this Computer's
MAC address - IP
Address
Select this option and enter the IP address of the computer on the LAN whose
MAC you are cloning. Once it is successfully configured, the address will be
copied to the rom file (ZyNOS configuration file). It will not change unless you
change the setting or upload a different rom file. It is advisable to clone the
MAC address from a computer on your LAN even if your ISP does not presently
require MAC address authentication.
Back Click Back to return to the previous screen.
Finish Click Finish to complete and save the wizard setup.
3.5 Basic Setup Complete
Well done! You have successfully set up your ZyWALL to operate on your network and access the Internet.