ZyXEL Communications ZyXEL ZyAIR 100 - Manual (Page 331)

ZyWALL 10~100 Series Internet Security Gateway
WAN and Dial Backup Setup 23-3
Figure 23-2 Menu 2: Dial Backup Setup
The following table describes the fields in this screen.
Table 23-2 Menu 2: Dial Backup Setup
FIELD DESCRIPTION EXAMPLE
Dial-Backup:
Active Use this field to turn the dial-backup feature on (Yes) or off (No). No
Phone
Number Enter the telephone number assigned to your line by your telephone
company. This field only accepts digits; do not include dashes and
spaces. 1234567
Port Speed Press [SPACE BAR] and then press [ENTER] to select the speed of the
connection between the Dial Backup port and the external device.
Available speeds are:
9600, 19200, 38400, 57600, 115200 or 230400 bps.
115200
AT Command
String:
Init Enter the AT command string to initialize the WAN device. Consult the
manual of your WAN device connected to your Dial Backup port for
specific AT commands. at&fs0=0
Edit Advanced
Setup To edit the advanced setup for the Dial Backup port, move the cursor to
this field; press the [SPACE BAR] to select Yes and then press
[ENTER] to go to Menu 2.1: Advanced Setup. Yes
Menu 2 - WAN Setup
MAC Address:
Assigned By= Factory default
IP Address= N/A
Dial-Backup:
Active= No
Phone Number=
Port Speed= 115200
AT Command String:
Init= at&fs0=0
Edit Advanced Setup= No
Press ENTER to Confirm or ESC to Cancel: