ZyXEL Communications ZyXEL ZyAIR 100 - Manual (Page 317)

ZyWALL 10~100 Series Internet Security Gateway
Introducing the SMT 21-3
Table 21-1 Main Menu Commands
OPERATION KEYSTROKES DESCRIPTION
N/A fields Some of the fields in the SMT will show a . This symbol refers
to an option that is Not Applicable.
Save your
configuration [ENTER] Save your configuration by pressing [ENTER] at the message
“Press ENTER to confirm or ESC to cancel”. Saving the data on the
screen will take you, in most cases to the previous menu.
Exit the SMT Type 99, then press
[ENTER]. Type 99 at the main menu prompt and press [ENTER] to exit the
SMT interface.
21.3.1 Main Menu
After you enter the password, the SMT displays the ZyWALL Main Menu, as shown next. Not all models
have all the features shown.
Figure 21-3 Main Menu (ZyWALL 100)
The following table describes the fields in this screen.
Table 21-2 Main Menu Summary
NO. Menu Title FUNCTION
1 General Setup Use this menu to set up dynamic DNS and administrative information.
2 WAN Setup Use this menu to clone a MAC address from a computer on your LAN and
configure the backup WAN dial-up connection.
Copyright (c) 1994 - 2001 ZyXEL Communications Corp.
ZyWALL 100 Main Menu
Getting Started Advanced Management
1. General Setup
2. WAN Setup
3. LAN Setup
4. Internet Access Setup
5. DMZ Setup
Advanced Applications
11. Remote Node Setup
12. Static Routing Setup
15. NAT Setup
21. Filter and Firewall Setup
22. SNMP Configuration
23. System Password
24. System Maintenance
25. IP Routing Policy
26. Schedule Setup
27. VPN/IPSec Setup
99. Exit
Enter Menu Selection Number: