Freescale Semiconductor Microcontrollers - Manual (Page 84)

Debugger Components
General Debugger Components
84 Microcontrollers Debugger Manual
Mode Submenu
The Mode Submenu is activated by highlighting the Mode entry on the Data menu:
Figure 3.24 Mode Submenu
Table 3.12 describes the Mode submenu entries.
Table 3.11 Format Selected and All Submenu
Menu entry Description
Symbolic Select the Symbolic (display format depends on the variable
type) display format. This is the default display.
Hex Select the hexadecimal data display format
Bin Select the binary data display format
Oct Select the octal data display format
Dec Select the signed decimal data display format
UDec Select the unsigned decimal data display format
Bit Reverse Select the bit reverse data display format (each bit is reversed).
Table 3.12 Mode Submenu
Menu Entry Description
Automatic Switches to Automatic mode (default); variables are updated
when the connection is stopped. Variables from the currently
executed module or procedure are displayed in the data
component.
Periodical Switches to Periodical mode; variables are updated at regular
time intervals when the connection is running. The default
update rate is 1 second, but can be modified by steps of up to
100 ms using the associated dialog box (see below).