Freescale Semiconductor Microcontrollers - Manual (Page 724)

Debugging Memory Map
DMM Commands
724 Microcontrollers Debugger Manual
the start address of the memory range
the size of the memory range
a long value for the DMM to handle the memory range (duplicated
handled is not allowed).
WARNING! User defined handles must be a value superior or equal to 100.
a value corresponding to a memory type handle, as given/listed with the
DMM command.
a "0" or "1" value, "0" forcing the memory range to be
refreshed after each debugger halting.
a value corresponding to an overlap priority handle/value, as given/
listed with the DMM command.
a "0" or "1" value, "1" enabling the memory range mapping.
a "0" or "1" value, "1" enabling the memory
range access while running.
“0” for R/W, “1” for write only, “2” for read only, “3” for
none.
Purpose
Insert a new memory range in the DMM, as if added via the DMM dialog/user
interface.
DMM DEL command
Syntax
DEL
with , a memory range module handle as given/listed with
the DMM command.
Purpose
Delete one specific DMM memory range module by handle reference.