Freescale Semiconductor Microcontrollers - Manual (Page 331)

HC08 Full Chip Simulation
Configuration Procedure
331 Microcontrollers Debugger Manual
USBRESET Command
The USB RESET command simulates a USB reset from the USB connection. If the
URSTD bit is clear in the CONFIG register, then a reset of the MCU occurs just as with a
RESET command. If the URSTD bit is set, then a USB interrupt occurs. See the technical
description of the USB peripheral in the Freescale Manual for more information.
Syntax
>USBRESET
Example
>USBRESET
Simulate USB reset of the MCU.