Select derivative option, Unsecure option, Trigger module settings – Freescale Semiconductor Microcontrollers User Manual

Page 481: Bus trace, Flash option, Reset to normal mode option, Show status option

HCS08 Open Source BDM Connection

First Steps From Within an Existing Project

481

Microcontrollers Debugger Manual

Select Derivative Option

Select HCS08 Open Source BDM > Select Derivative to display the

NOTE

If the debugger recognizes only one derivative, this menu entry is not available.

Unsecure Option

Select HCS08 Open Source BDM > Unsecure to unsecure the device when necessary.
This leads to the

dialog box.

Trigger Module Settings

Select HCS08 Open Source BDM > Trigger Module Settings to open the Trigger Module
Settings dialog. For more information see

Bus Trace

Select HCS08 Open Source BDM > Bus Trace to open the Trace component window
within the debugger main window. For more information see

Flash Option

Select HCS08 Open Source BDM > Flash to open the Non-Volatile Memory Control
dialog box. For more information see

Reset to Normal Mode Option

Select HCS08 Open Source BDM > Reset to Normal Mode to reset the hardware CPU to
normal mode.

Show Status Option

Select HCS08 Open Source BDM > Show Status to display the