Freescale Semiconductor Microcontrollers - Manual (Page 620)

ColdFire V1 Full Chip Simulation Connection
FCS Visualization Utilities
620 Microcontrollers Debugger Manual
Programmable IO_Ports Menu
Figure 28.48 shows the Programmable IO_Ports menu and Table 28.9 describes its entry.
Figure 28.48 The Programmable IO_Ports Menu
Port Address
The Port Address dialog box shown in Figure 28.49 allows you to set the port address and
control port address.
Figure 28.49 Port Address Dialog Box (Setup)
You can enter the address for the five ports A, B, C, D, and E, and the address for the
Control port. Click OK to validate.
The Control register coupler allows you to configure the port type: for each port, set a bit
to 1 to configure the port as output and clear to 0 to configure the port as input, as shown
in
Figure 28.50 .
Table 28.9 Programmable IO_Ports Menu Description
Menu entry Description
Setup Opens the Programmable IO_Ports Port Address dialog.