Freescale Semiconductor Microcontrollers - Manual (Page 160)

Control Points
Breakpoints
160 Microcontrollers Debugger Manual
Figure 4.2 Controlpoints Configuration Window (Breakpoints Tab)
Breakpoints Tab
The Controlpoints Configuration Window (Breakpoints Tab) contains:
• List box that displays the list of currently defined breakpoints
• Breakpoint: group box that displays the address of the currently selected breakpoint,
name of procedure in which the breakpoint has been set, state of the breakpoint
(disabled or not), and type of breakpoint (temporary or permanent).
• Condition: group box that displays the condition string to evaluate, and the state of
the condition (disabled or not).
• Command: group box that displays the command string to execute and the state of
the command (disable or continue after command execution).
• Counter: group box that displays the current value of the counter and interval value
of the counter.
NOTE Current and Interval values are limited to 2,147,483,647. If entering a number
greater than this value, a beep occurs and the character is not appended. When
the Interval value is changed, the Counter value is automatically set to the
Interval value.
• Delete button to remove the currently selected breakpoint.