Freescale Semiconductor Microcontrollers - Manual (Page 159)

Control Points
Breakpoints
159 Microcontrollers Debugger Manual
Breakpoints are controlled through the Breakpoints tab of the Controlpoints Configuration
window. This window can be opened through the Source Window Context menu, as
described below:
Figure 4.1 Source Window Context Menu
1. Point at a C statement in the Source window, and click the right mouse button.
2. Select Show Breakpoints from this menu.
The Controlpoints Configuration Window (Breakpoints Tab) is opened. The Breakpoints
tab of this window is shown in Figure 4.2 .