Table 3.51, Led instrument, Segment display instrument – Freescale Semiconductor Microcontrollers User Manual
Page 150

Debugger Components
Visualization Utilities
150
Microcontrollers Debugger Manual
LED Instrument
The LED instrument is used for observing one definite bit of one byte (
). There
are only two states: On and Off.
Figure 3.93 Led Instrument
LED instrument attributes are shown in
.
7-Segment Display Instrument
This is the well known 7-Segment Display instrument for numbers and characters. It has
seven segments and one point. These eight units represent eight bits of one byte (
Figure 3.94 7-Segment Display Instrument
Table 3.51 Knob Instrument Attributes
Attribute
Description
Low Display Value
Defines the zero point of the indicator. The values below this
definition are not displayed.
High Display Value
Defines the highest position of the indicator. It defines the value
on which the indicator reads 100%.
Indicator Color
Defines the color and the width of the pen used to draw the
indicator.
Knob Color
Defines the color of the knob side.
Table 3.52 LED Instrument Attributes
Attribute
Description
Bitnumber to Display
Defines the bit of the given byte to be displayed.
Color if Bit = = 1
Defines the color if the given bit is set.
Color if Bit = = 0
Defines the color if the given bit is not set.