Ddeprotocol – Freescale Semiconductor Microcontrollers User Manual
Page 771

Debugger Engine Commands
Debugger Commands
771
Microcontrollers Debugger Manual
DDEPROTOCOL
The DDEPROTOCOL command is used to configure the Debugger/Simulator dynamic
data exchange (DDE) protocol.
By default the DDE protocol is activated and not displayed in the command line
component.
Usage
DDEPROTOCOL ON|OFF|SHOW|HIDE|STATUS
Where:
• ON enables the DDE communication protocol
• OFF disables the DDE communication protocol
• SHOW displays DDE protocol information in the command line component
• HIDE hides DDE protocol information in the command line component
• STATUS provides information if the DDE protocol is active (on or off) and if
display is active (Show or Hide)
Components
Debugger engine.
Example:
in>DDEPROTOCOL ON
in>DDEPROTOCOL SHOW
in>DDEPROTOCOL STATUS
DDEPROTOCOL ON - DISPLAYING ON
The DDE protocol is activated and displayed, and status is given in the command
line component.
NOTE
For more information on Debugger/Simulator DDE implementation, refer to
the
chapter.