Dilswitch instrument, Knob instrument – Freescale Semiconductor Microcontrollers User Manual
Page 149

Debugger Components
Visualization Utilities
149
Microcontrollers Debugger Manual
flasher is on, while bit 1 says that the brake light is on. So for your simple application you
need the following bitmaps with their settings:
• No light on bitmap: AND mask 3, EQUAL mask 0
• Flasher on bitmap: AND mask 3, EQUAL mask 1
• Brake light on bitmap: AND mask 3, EQUAL mask 2
• Brake and flasher light on: AND mask 3, EQUAL mask 3
DILSwitch Instrument
The DILSwitch instrument is also known as Dual-in-Line Switch (
). It is
mainly used for configuration purposes. You can use it for viewing or setting bits of one to
four bytes.
Figure 3.91 DILSwitch Instrument
DILSwitch instrument attributes are listed in
.
Knob Instrument
The Knob instrument is normally known as an adjustment instrument. For example, it can
simulate the volume control of a radio (
).
Figure 3.92 Knob Instrument
Knob instrument attributes are shown in
Table 3.50 DILSwitch Instrument Attributes
Attribute
Description
Display 0/1
When enabled, displays the value of the bit under each plot of
the DILSwitch instrument.
Switch Color
Specifies the color of the switch.