Xerox VersaLink C500/DN Color Laser Printer - Manual (Page 66)

Raw TCP/IP Printing
Raw TCP/IP is used to open a TCP socket-level connection over Port 9100, and stream a print-ready
file to the printer input buffer. It then closes the connection either after sensing an End Of Job
character in the PDL or after expiration of a preset timeout value. Port 9100 does not require an LPR
request from the computer or the use of an LPD running on the printer. Raw TCP/IP printing is
selected in Windows as the Standard TCP/IP port.
Note: Enable TCP/IP before enabling Raw TCP/IP printing.
C Coonnffiigguurriinngg RRaaw w TTC CPP//IIPP SSeettttiinnggss
1. In the Embedded Web Server, log in as administrator, then click Connectivity .
2. In the Protocols area, click Port 9100 .
3. For Port, enable toggle button.
4. For Port Number, ensure that the Port is set to 9100.
5. For PJL, enable the toggle button.
6. Click Print Mode , then select an option.
7. For Timeout, type the number of seconds.
8. For TBCP Filter, enable the toggle button.
9. To use TCP-MSS, enable the toggle button, then for IPv4 Subnet 1, IPv4 Subnet 2, and IPv4
Subnet 3, type the IP addresses and ports.
10. Click OK .
66 Xerox ® VersaLink ® Series Multifunction and Single Function Printers
System Administrator Guide
Network Connectivity