Xerox VersaLink C500/DN Color Laser Printer - Manual (Page 37)

• For both WPA2 Enterprise and Mixed Mode Enterprise:
– Click Authentication Method , then select the authentication method for your wireless
network.
– For Root Certificate, upload a Root Certificate.
– Type values for EAP Identity, Login Name, and Password.
3. Click OK .
4. For the new settings to take effect, restart the printer.
5. Disconnect the printer from the wired network.
C Coonnnneeccttiinngg ttoo aa W Wii--FFii N Neettw woorrkk aatt tthhee C Coonnttrrooll PPaanneell
To connect to a Wi-Fi network at the control panel:
1. At the printer control panel, press the Home button.
2. Log in as administrator. For details, refer to Accessing the Control Panel as a System
Administrator .
3. Touch Device → Connectivity → Wi-Fi .
4. To enable the Wi-Fi connection feature, touch the enable toggle button.
5. To connect automatically to an existing Wi-Fi network:
a. In the list of available Wi-Fi networks, touch the required network.
Note: If the required Wi-Fi network is not listed, or if the required network uses WPS,
configure the connection manually. For details, refer to step 6.
b. If needed, to log in to the network, type the password.
c. To select a Wi-Fi frequency band, touch Wi-Fi Band , then select an option.
Note: The Wi-Fi frequency band is set to AUTO by default.
d. Touch OK .
6. To connect manually to a Wi-Fi network:
a. Touch Manual Setup .
b. In the first field, type a name for the Wi-Fi network, then touch Enter .
c. Touch Network Type , then select an option.
d. Touch Security , then select an option.
e. Touch Wi-Fi Protected Setup (WPS) , then select an option.
Note: For a WPS setup with a Push Button Connection (PBC), select PBC .
f. Touch OK .
Xerox ® VersaLink ® Series Multifunction and Single Function Printers
System Administrator Guide
37
Network Connectivity