Xerox VersaLink C500/DN Color Laser Printer - Manual (Page 57)

• DHCP : This option permits the printer to obtain an IP address from a DHCP server or from a
BOOTP server that is configured to accept DHCP requests. The printer requests that the server
register the IP address and hostname of the printer with the DNS server.
5. To release the DCHP address when the printer is powered off, for Release current IP when the
Device is powered off, select the toggle button.
6. Click OK .
Note:
• For the new settings to take effect, restart the printer.
• Changing the IP address disconnects the Embedded Web Server.
• To reconnect to the Embedded Web Server, in the address field of the Web browser, type
the new IP address of the printer.
C Coonnffiigguurriinngg IIPPvv66 SSeettttiinnggss
IPv6 hosts can configure themselves automatically when connected to a routed IPv6 network using
the Internet Control Message Protocol Version 6 (ICMPv6). ICMPv6 performs error reporting for IP
along with other diagnostic functions. When first connected to a network, a host sends a link-local
multicast router solicitation request for configuration parameters. If suitably configured, routers
respond to this request with a router advertisement packet containing network-layer configuration
parameters.
1. In the Embedded Web Server, log in as administrator, then click Connectivity .
2. In the Connections area, click Ethernet .
3. In the IPv6 area, click Edit .
4. To select how DHCP operates for IPv6, click Purpose , then select an option.
5. If you have enabled Manual Address, type values for Manual Address and Gateway Address.
6. Click OK .
Note: For the new settings to take effect, restart the printer. Changing the IP address
disconnects the Embedded Web Server.
7. To reconnect to the Embedded Web Server, in the address field of the Web browser, type the new
IP address of the printer.
C Coonnffiigguurriinngg D DN NSS SSeettttiinnggss
Domain Name System (DNS) is a system that maps host names to IP addresses.
1. In the Embedded Web Server, log in as administrator, then click Connectivity .
2. In the Connections area, click Ethernet .
3. In the DNS area, click Edit .
4. For Domain Name, type a unique name for your printer. If the host name registers to the DNS
server successfully, the host name appears as a Verified Host Name. The default host name is
XRXxxx, where xxx is the MAC address of the printer.
Xerox ® VersaLink ® Series Multifunction and Single Function Printers
System Administrator Guide
57
Network Connectivity