Installing a software feature at the control panel – Xerox VersaLink C500/DN Color Laser Printer User Manual
Page 23
4. To adjust the sound volume for an event, touch an event, then move the appropriate volume
slider control, as needed.
•
Touch
: A sound plays when a user interacts with the control panel touch screen.
•
Job Completion
: A sound plays when a print job, copy job, or receive-fax job completes.
•
Log In
: A sound plays when a user swipes an authentication card.
•
Error/Fault
: A sound plays when the device issues an alert or when the device requires user
attention.
•
Power
: A sound plays when the device is powering down.
•
Mobile Device Connected
: A sound plays when a connection to a mobile device is detected.
•
Fax Processing Tones
: A sound plays when a fax is sending or receiving.
•
Fax Ring Tones
: The fax line ring tones are audible when the device receives an incoming fax
call.
5. Touch
OK
.
IInnssttaalllliinngg aa SSooffttw
waarree FFeeaattuurree aatt tthhee C
Coonnttrrooll PPaanneell
Before you begin, ensure that the required feature kit is installed.
1. At the printer control panel, press the
Home
button, then touch the
Device
button.
2. Touch
General
→
Feature Installation
.
3. Touch
Enter Feature Installation Key
, then type the key.
4. Touch
OK
.
Xerox
®
VersaLink
®
Series Multifunction and Single Function Printers
System Administrator Guide
23