beautypg.com

Disabling wireless networking – Xerox VersaLink C500/DN Color Laser Printer User Manual

Page 40

background image

4. Use an Ethernet cable and connect a computer directly to the printer.

Note:

• Ensure that wireless connectivity is disabled on your computer.

• Depending on your computer hardware, use a crossover cable or adapter.

5. Verify the IP address of the computer. Ensure that the computer obtains a private IP address, in

the 169.254.x.x range, and is therefore on the same subnet as the printer.

6. On the computer, access the Embedded Web Server. Log in as administrator, then configure the

wireless settings. For details, refer to

Connecting to a Wireless Network

.

7. For the new settings to take effect, restart the printer.

8. Disconnect the Ethernet cable between the printer and the computer.

D

Diissaabblliinngg W

Wiirreelleessss N

Neettw

woorrkkiinngg

D

Diissaabblliinngg W

Wiirreelleessss N

Neettw

woorrkkiinngg ffrroom

m tthhee C

Coonnttrrooll PPaanneell

You can disable the wireless network from the printer control panel.

Note:

Wireless networking is available only on printers with the optional Wireless Network

Adapter installed.

To disable wireless networking from the Control Panel:

1. At the printer control panel, press the

Home

button.

2. Log in as administrator. For details, refer to

Accessing the Control Panel as a System

Administrator

.

3. To open the Wi-Fi menu, touch

Device

Connectivity

Wi-Fi

.

4. To toggle Wi-Fi from On to Off, touch the

Wi-Fi

toggle button.

5. Touch

OK

.

6. Press the

Home

button.

7. For the setting to take effect, at the prompt, touch

Restart Now

.

D

Diissaabblliinngg W

Wiirreelleessss N

Neettw

woorrkkiinngg FFrroom

m tthhee EEm

mbbeeddddeedd W

Weebb SSeerrvveerr

Note:

Wireless networking is available only on printers with the optional Wireless Network

Adapter installed.

1. In the Embedded Web Server, log in as administrator, then click

Connectivity

.

2. In the Connections area, click

Wi-Fi

.

3. Click the

Enable

toggle button.

4. Click

OK

.

5. To activate your changes, at the prompt, click

Restart Now

.

40

Xerox

®

VersaLink

®

Series Multifunction and Single Function Printers

System Administrator Guide

Network Connectivity