Xerox VersaLink C500/DN Color Laser Printer - Manual (Page 64)

C Coonnffiigguurriinngg LLD DA APP ttoo A Acccceessss A Addddrreessss B Booookk
IInnffoorrm maattiioonn
You can configure the printer to allow the logged-in user to access address book information that is
stored on an LDAP server. The logged-in user can access address book contact information based on
the permissions set for the user on the LDAP server.
1. In the Embedded Web Server, log in as administrator.
2. Check the date and time on the printer. For details, refer to Setting the Date and Time .
Note: Ensure that the date and time on the printer is within 5 minutes of the date and
time on the authenticating server. Xerox recommends that you assign the printer to the
same time server that the LDAP server uses. For configuration details, refer to SNTP .
3. Configure LDAP. To configure the LDAP Server, click Connectivity → LDAP → LDAP Servers/
Directory Services . For details, refer to Adding LDAP Server Information .
4. Configure authentication to use the Network login method for LDAP or Kerberos, depending on
your server. For details, refer to Setting the Network Login Method .
Note: If you do not know your server type, contact your network administrator.
5. Set Guest Access to No Access . This setting requires that all users log in to access printer
functions. For details, refer to Editing Guest Access .
64 Xerox ® VersaLink ® Series Multifunction and Single Function Printers
System Administrator Guide
Network Connectivity