beautypg.com

Ipsec, Managing settings for ssl/tls, Enabling https at the control panel – Xerox VersaLink C500/DN Color Laser Printer User Manual

Page 103: Iippsseecc

background image

IIPPsseecc

Internet Protocol Security (IPsec) is a group of protocols used to secure Internet Protocol (IP)
communications by authenticating and encrypting each IP data packet. It allows you to control IP
communication by creating protocol groups, policies, and actions.

To configure IPsec:

1. In the Embedded Web Server, log in as administrator, then click

Connectivity

IPsec

.

2. To enable IPsec, click the

Enable

toggle button.

3. To select a method of authentication, click

IKE Authentication Method

, then select an option.

• If you selected Digital Signature, click

Device Certificate

, then select an option.

• If you selected Preshared Key, for Preshared Key and Retype Preshared Key, type the key.

4. For IKE SA Lifetime, type the number of minutes that the printer waits before it terminates the

security association.

Note:

The value for IKE SA Lifetime must be greater than or equal to the value for IPsec SA.

1. For IPsec SA Lifetime, type the number of seconds that the printer waits before terminating the

security association.

Note:

The value for IPsec SA must be less than or equal to the value for IKE SA Lifetime.

1. To select a Diffie-Hellman group, click

DH Group

, then select an option.

2. To enable Perfect Forward Secrecy, for PFS, click the enable toggle button.

3. To specify an IPv4 address for the IPsec endpoint, for Specify Destination IPv4 Address, type the

IPv4 address.

4. To specify an IPv6 address for the IPsec endpoint, for Specify Destination IPv6 Address, type the

IPv6 address.

5. To allow communication with devices that do not use IPsec, click

Communicate with Non-IPsec

Devices

, then select

Enabled

.

6. Click

OK

.

M

Maannaaggiinngg SSeettttiinnggss ffoorr SSSSLL//TTLLSS

EEnnaabblliinngg H

HTTTTPPSS aatt tthhee C

Coonnttrrooll PPaanneell

1. At the printer control panel, log in as administrator, then press the

Home

button.

2. Touch

Device

Connectivity

.

3. Touch

HTTPS

.

4. Touch

Enabled

.

Note:

When Secure HTTP is enabled, all pages in the Embedded Web Server contain

https://

in

the URL for the webpage.

Xerox

®

VersaLink

®

Series Multifunction and Single Function Printers

System Administrator Guide

103

Security