SMA Sunny Boy Control - Manual (Page 99)

Sunny Boy Control
SMA Technologie AG
User Manual SUNBC-14:NE0206 95
Hardware-Based Configuration
To configure the connectors on the Sunny Boy Control Plus itself, use the menu
“Setup…Interfaces”.
[ Plus I/O ]
„Analog In Analog inputs AIN1–AIN8
Section 7.2
„Digital In Digital inputs DIN1–DIN8 Section 7.3.2
„Digital Out Digital outputs DOUT1–DOUT8 Section 7.3.3
„Variable Variables Var1–Var16 Section 7.4
„Monitoring Monitoring channels Mon1–Mon8 Section 7.5
Fig. 7.2: Configuring the analog and digital interfaces
When leaving the “Plus I/O” menu, the changes made are saved after confirma-
tion. When the analog, digital, variable, or monitoring channels are changed, the
device generates a new channel description, which can be recognized by a change
of the device model information (e.g., from “SBC+a4Eb” to “SBC+a4Ec”).
Software-Based Configuration
The Sunny Boy Control Plus can also be configured using the Sunny Data Control
software.
Parameter
Channel Value Description
+a_SET Choice --- Selecting the channel to be changed
+b_SET Help
Select with... Help messages for different input options
+c_SET Value
--- Displaying the current setting for the se-
lected channel
+d_SET Plus-Function
--- “store”, “undo”, “Profile 1–2”
Table 7.1: Configuration using Sunny Data Control