SMA Sunny Boy Control - Manual (Page 17)

Sunny Boy Control
SMA Technologie AG
User Manual SUNBC-14:NE0206 13
Display Symbols
The following symbols may appear on the display.
Symbol Explanation
‡Pac… Indicates the current line. Press [ ↑ ] or [ ↓ ] to
move to another line.
english Indicates the current menu item or parameter.
Press [ENTER] to select it.
…11:20 Indicates the current setting.
Press [ENTER] to confirm it.
Press [ESC] to cancel it.
[ MENU ] Indicates the current menu. Press [ESC] to leave
it.
„Submenu On the left side: Indicates a submenu.
+495619522„ On the right side: Indicates that the line contin-
ues.
Pac… Indicates that the values appear on the next
line.
……1234W Indicates a continuation of the previous line.
Table 1.4: Display symbols and their explanations
Press [ ↑ ] or [ ↓ ] to scroll through menus and screens. Submenus are indicated by
the symbol “ „ ” and can be selected by pressing [ENTER]. The symbol “ „ ” appears
at the right side of lines exceeding 16 characters to indicate that not all characters
can be displayed. Enter edit mode to view these characters.
Edit Mode
The edit mode allows you to make settings or change parameters. Editable parame-
ters are marked with the symbol “ ”. To enter edit mode, press [ENTER].
After you have entered edit mode, the parameter starts blinking. To change its value,
press [
↑ ] or [ ↓ ]. To confirm the change, press [ENTER]; to cancel it, press [ESC].
After a parameter has been changed in the edit mode, the selection arrow blinks until
the change is again confirmed by pressing [ENTER] or cancelled by pressing [ESC].
If no key is pressed for 60 seconds, the new setting will be automatically cancelled.