SMA Sunny Boy Control - Manual (Page 131)

Sunny Boy Control
SMA Technologie AG
User Manual SUNBC - 14 : NE0206 127
Parameters Data Explanation
AC_... Alarm Contact
AC_Default Switch Contact 1_1 Relay default switch: 1_1, 1_2
AC_Errors ON Alarm contact “”ON/OFF” for errors
AC_Speaker deactivated Beeper signals errors/warnings
AC_Warnings ON Alarm contact “”ON/OFF” for warnings
MK_DisplayFlash activated Display light flashes if error
CO_… / KO_... Communication
CO_Buffer 2 cycles Number of cycles for buffering the measuring data
CO_CmdRetry 1 times Number of packet repeats in case of an error
CO_CmdTimeout 4000ms Max. timespan that the Sunny Boy Control
will wait for an answer from a device
CO_COM1 PowerLine Type of interface for COM1
CO_COM1 Baud 1200Baud Rate of transmission to PV system
CO_COM2 RS232 Type of interface for COM2
CO_COM2-Baud 19200Baud Rate of transmission to PC
KO_COM1-Prot. Sunny-Net Transmission protocol used
KO_COM2-Prot. Sunny-Net Transmission protocol used
KO_COM3 RS232 Type of interface for COM3 (Plus only)
KO_COM3-Baud 19200Baud Rate of transmission for COM3 (Plus only)
KO_COM3-Prot. Sunny-Net Transmission protocol used (Plus only)
KO_NET…. Refer to the NET Piggy-Back manual “NETPB-13:EE”
DA_... Data Archive
DA_Data Reading ON Data acquisition “ON/OFF”’
DA_Max. Storage 51.42 days Remaining storage capacity
DA_Meas. Interval 15.00 min Data-archiving interval
DA_Storage ON “ON/OFF” when system is active, “24h” if permanent
E-Mail (refer to the NET Piggy-Back manual “NETPB-13:EE”)
ED_... External Display
ED_InterfacePort deactivated Interface for external display
ED_TYPE HvG External display model
ES_... Switching Contact
ES_Default Switch Contact 2_1 Relay default switch: 2_1, 2_2
ES_Minimum Time 60.00 min Minimum switch-on time of switching contact
ES_Poff 0.00 kW Switch-off tolerance of switching contact
ES_Pon 0.00 kW Switch-on tolerance of switching contact
ES_Power Switch deactivated Switching contact power management activated/deactivated