SMA Sunny Boy Control - Manual (Page 53)

Sunny Boy Control
SMA Technologie AG
User Manual SUNBC-14:NE0206 49
4.3.1 “Total Plant” function
[ TOTAL PLANT ]
‡Pac…
…………………0W
Total system power output
E-today… Š
……………---kWh
Daily energy yield
E-total…
……………---kWh
Total energy yield
DATA STORAGE
Energy Values…
…………………0days Timespan of daily values stored
DAS Data…
…………………0cycles
Number of measuring-channel cycles
Detected…
…………………0devices
Number of detected inverters
Registered…
…………………0devices
Number of registered inverters
Online…
…………………0devices
Number of inverters currently online
Fig. 4.5: “Total Plant” function
The “Total Plant” function gives an overview of the operating condition of your
entire system.
In addition to the total (E-total) and daily (E-today) energy yields of the system, you
can display the current data storage settings of the Sunny Boy Control.
Depending on the configuration, the storage capacity for the daily energy values is
about one year. It is therefore recommended that you back up the acquired data at
least once a year in order to avoid data loss due to insufficient memory. The maxi-
mum number of the measuring-channel cycles depends on the number of defined
measuring channels. Refer to Table 10.1: “Number of daily measuring intervals” for
a detailed calculation.