SMA Sunny Boy Control - Manual (Page 87)

Sunny Boy Control
SMA Technologie AG
User Manual SUNBC-14:NE0206 83
6.4.4 Adding a New Device
To add a new device to an existing system, proceed as follows:
•
Install the device.
•
Start the device detection (Setup…PV-Plant…Detection). The new de-
vice’s serial number appears on the display.
•
When prompted to confirm the new device, press
[
ENTER
]
to add it to the
system.
If the new device is not found during detection, check the cables and connections.
6.4.5 Removing a Device
To remove a device from the system, give it the ID “99” under
“Setup…PV-Plant…Registration”.