SMA Sunny Boy Control - Manual (Page 159)

Sunny Boy Control
SMA Technologie AG
User Manual SUNBC - 14 : NE0206 155
10.4 AT Commands
The AT commands listed in Table 10.12: are the default parameters for modem ini-
tialization. They can be used to alter the init string according to specific requirements
(see section “3.3 Modem Connection”).
Explanation ELSA
Microlink
33K
ELSA/Devolo
Microlink
56ki
Zyxel /
Hayes
Standard
Load factory settings &F &F &F
Disable character echo in command state E0 E0 E0
Display result code in verbose form V1 V1 V1
Ignore dial tone/busy tone X0 X0 X0
Return result code Q0 Q0 Q0
Speaker on medium level (optional) L2 L2 L2
Speaker always on (optional) M1 M2 M2
Automatic answer after 1 ring S0=1 S0=1 S0=1
Flow control between PC and modem disabled
(no handshake) - +IFC=0,0 -
Ignore DTR status change &D0 &D0 &D0
Automatic re-synchronization on - %E1
Save extended configuration profile (0) &W &W &W
Table 10.12: AT commands