SMA Sunny Boy Control - Manual (Page 64)

Sunny Boy Control
SMA Technologie A G
User Manual SUNBC-14:NE0206 60
Displayed message Type of event Explanation
System messages
Startup Status Device was switched on/system was started up.
Time changed Status Time or date was changed by user.
Failure conf. Status User acknowledged error or warning message.
reset diagnosis Status Diagnostic data was manually reset.
System Reset Warning System was restarted after a failure.
Device-related messages
Device Failure Warning Device reported a failure.
Yield Error Device yield is below tolerance.
Isolation Res. Warning Insulation resistance is low.
SAFETY! Iso.Res. Error Insulation resistance is too low.
Communication monitoring
CommSpot20 Warning Short interruption of communication
Offline Warning Device cannot be reached.
Communication Error Long interruption of communication
24h Offline Error Device could not be reached for at least 24 hours.
Fax/e-mail-related messages
RI Plant-Info Status System information was sent.
RI Error/War. Status Error/warning report was sent.
RI Transmission Warning Transmission failed.
RI Transmission Error Transmission could not be initiated.
Monitoring messages (Sunny Boy Control Plus)
Monitor. Warning Falling short of tolerance for warnings.
Monitor. >MAX Warning Exceeding tolerance for warnings.
Monitor. Error Falling short of tolerance for errors.
Monitor. >MAX Error Exceeding tolerance for errors.
Table 5.1: Event messages of the Sunny Boy Control