SMA Sunny Boy Control - Manual (Page 89)

Sunny Boy Control
SMA Technologie AG
User Manual SUNBC-14:NE0206 85
[CHAN.SELECTION]
„SC…SunBC-07 Device ID...device model
„01…WR700-08
„02…WR700-08 Š
„03…WR700-04
„17…WR700-04
Fig. 6.28: Device selection screen
Press [ENTER] to select a device and display all of its available measuring channels.
[01:C.SELECTION] [ Device ID: Channel selection]
Pac Measuring channel marked with a point
Fac
Zac-Srr Š
Fig. 6.29: Measuring channel selection screen
The measuring channels (i.e., channels selected for storage) are marked with a point.
Press [ENTER] to select or deselect a channel for storage. The Sunny Boy Control can
manage up to 250 channels spread freely over all of the connected devices. To ob-
tain the best storage depth, keep the number of measuring channels as low as possi-
ble. Refer to section 9.2 for details on the storage capacity of the Sunny Boy Control.
The data archive is not affected by changes in the selection of measuring channels.
When leaving the data archive function, you will be asked to confirm any changes.
[ DAS CONFIG ]
Do you want
to save the
changes?
Fig. 6.30: Confirming the measuring channel configuration