SMA Sunny Boy Control - Manual (Page 49)

Sunny Boy Control
SMA Technologie AG
User Manual SUNBC-14:NE0206 45
4 Menu Functions for Data Display
4.1 Startup Screen
At every startup the Sunny Boy Control performs an automatic self-test. If the self-test
produces an error, it is shown in the display and, depending on the settings, the
beeper or an external alarm is activated. If no errors are detected, the Sunny Boy
Control will simply display its serial number and firmware version. At this point, you
can press
[
ESC
]
to enter the main menu. If no key is pressed for 60 seconds, the
Sunny Boy Control will automatically start the online info.
[ SUNNY BOY ]
[ CONTROL ]
SerNo……xxxxxxxxx
Software………V4.xx
Fig. 4.1: Startup screen
If the Sunny Boy Control displays an error, refer to section “9.1 Messages and Their
Causes”.
Depending on your settings, the alarm contact may be activated when an error oc-
curs during the self-test. Refer to section “6.3.3 Alarm Contact” for details.