Visara LINCS Central Control - Manual (Page 96)

90
LINCS Central Control
707024-002
Display/Update Host Connections
Each LINCS port can support up to ten sessions. Sessions on the port are labeled A through J.
The port’s sessions can be attached to different hosts, enabling display stations to switch
easily from one host to another. The sessions can be attached to 3270 hosts or ASCII hosts.
Using the update option ( ,u ) and password, a supervisory disconnect on any host session
may be processed. Each host-LU contains a field to the left of the host identifier (see the
example panel). This field can be used to disconnect a session by entering the letter D or d in
the field and then pressing the PF10 key. Multiple sessions may be disconnected simultaneously.
When the disconnect is processed, an asterisk ( * ) is placed to the left of the host-LU field. If
the disconnect cannot occur for any reason, a question mark ( ? ) appears to the left of the
host-LU field.
An additional parameter may be entered to show only the connections for a particular host
type. This parameter may be entered with or without the update option (such as 6,3 or 6,u,3 ).
Use three ( 3 ) as the parameter to display 3270 host connection information, @ for LAT, T or
t for TELNET, and X or x for ASCII.
Host Connection Panel
The Host Connection Panel displays the host connections that are configured, in a format
similar to the configuration panel. As LINCS capabilities have grown from the original 16
Host support to 128 Host capabilities (on the SCON-28L), the format of the information has
changed somewhat. The table following the example panel describes both the original and the
newer or modified character representations.
Host Connections LINCS C8.2 Central Control
(A) (B) (C) (D) (E) (F) (G) (H) (I) (J)
Port H-LU H-LU H-LU H-LU H-LU H-LU H-LU H-LU H-LU H-LU
FET1.000 00 02 12 02 13 02d 14 02d & B1 * d 19 02d > 01 > 02 > 01
FET1.001 01 03 02 03 03 03 12 03 13 03 15 03 & A0 > 01 > 02
FET1.002 00 04 01 04 02 04 03 04 12 04 13 04 14 04 02 01 >T 02 > 03
FET1.003 01 05 02 05 03 05 12 05 13 05 14 05 & D7 * *
FET1.004 01 06 01 06 02 06 03 06 > 01 > 01
FET1.005 01 07 01 07 02 07 03 07 * > 02 * > 01 * > 01
FET1.006 01 08 01 08 02 08 03 08 . . . . .
FET1.013 00 0F 01 0F 02 0F 03 0F
FET1.014 * *
FET1.015 * *
PF: 1-Menu PF7-Back PF8-Forw PF9-Refresh PF10-Process