Visara LINCS Central Control - Manual (Page 55)

49
Chapter 6. Windowing Setup
707024-002
Copy All
This function is only available if the update parameter was entered. Copy All copies the
system profiles to the corresponding user profiles for all configured ports, updating only the
disk file. LINCS can then be IMLed to make the user profiles active, or you can do a restore
profile in Workstation Control (WSC).
Before copying each system profile, the mod size and the configured sessions on the system
profile are validated for each port to make sure that this profile can be supported on the
specified port.
The Copy All function cannot be executed from a Central Site Control Facility device.
Windowing Requirements
You must use the update option to modify windowing system profiles.
You must enable Windowing on the Device Profile/Display menu (in Configuration), to be
able to access Windowing.
Windowing uses some Presentation Space Memory. See Feature Memory on the Configuration
main menu to make sure you have enough memory.
Windowing requires a Feature Activation Disk. See Feature Activation/Deactivation on the
Customization Data main menu.
Windowing is not supported on DFT terminals.
Playback Sequences
A local playback sequence is a recorded keyboard sequence defined by a user for local use. A
global playback sequence is a recorded sequence defined for all users. Local sequences defined
have priority over global sequences with the same key definitions.
This panel displays the playback sequences defined to each PFkey for the specified port ID.
The port ID defaults to your port, unless you specify a port ID as a parameter to enter this
panel, or press PF7 or PF8 to scroll backward or forward to other portIDs.
Note that any local sequences recorded using the Record/Playback feature must use this utility
to save the sequences to disk, or the sequences will be lost when the LINCS node is IMLed.
Local Playback Sequences
Playback Sequences LINCS C8.2 Central Control
Port Number: TRC1.001 Sequence Capacity Remaining: 87 %
CMD Playback Name length CMD Playback Namelength
G PF1 . LOGOFF......... 44PF13 . .............. 0
L PF2 . CICS.CONNECT.... 64PF14 . .............. 0
PF3 . ................ 0 PF15 . .............. 0
GL PF4 . MY.CONNECT...... 32PF16 . .............. 0
. . . . . . . .
PF12 . ............... 0 PF24 . .............. 0
Commands D = Delete Local Sequence
C = Copy Local to Global Sequence
PF1-Menu 3-Disp_Globals 7-Back 8-Forw 9-Restore 10-Save