Visara LINCS Central Control - Manual (Page 140)

134
LINCS Central Control
707024-002
Congestion
This field displays if the LINCS node is over-using the buffers or cycles.
Route Addition Resistance
This field displays the Route Addition Resistance for this node.
Memory Size
The Memory Size field indicates how much memory is available for use by APPN.
Memory Used
The Memory Used field indicates how much memory is being used by APPN.
PF4-Start_Node
This key is only displayed when the utility is entered in update mode. It allows you to start the
APPN node. You may want to start the node if you previously stopped it and want to start it
without IMLing LINCS.
PF5-Stop_Node
This key is only displayed when the utility is entered in update mode. It allows you to stop the
APPN node. You may want to stop the node to isolate a problem or to take the LINCS node
out of APPN network without affecting the other users. Once the node is stopped, all the
APPN sessions are destroyed. The APPN users may have to restart their sessions if the node
is started using PF4-Start_Node.
APPN Circuit Status
This panel lists all defined APPN Circuits and their status. If the utility is entered with the
update option, then links may be stopped and started.
Circuit Status LINCS C8.2 Central Control
NETID CP Name Node Type Status Sessions
Link Station Name
———— ———— ———— ————— ———— ————————
THISNTWK LINCSCP1 Network Active 2 @I000001
THISNTWK LINCSCP2 End Active 4 @I000002
THISNTWK LINCSCP3 Network Not Active 0 LS000000
THISNTWK LINCSCP4 Network Pend Active 0 LS000001
THISNTWK LINCSCP5 VRN Pend Inact 0 LS000002
THISNTWK LINCSCP6 Learn Not Active 0 LS000003
PF: 1-Menu 3-Details 4-Start_All 5-Stop_All 8-Forw 9-Restart
PF3-Details displays an additional panel with detailed information about the individual links.
The first panel displays a Circuit Status/Details panel for the first circuit currently displayed
on the Circuit Status/Summary panel. PF8-Forw displays the details for other circuits.
NETID
The NETID is the Network ID of this network if the link is active.
CP NAME
The CP NAME is the Control Point Name of the adjacent node if the link is active.
Node Type
The adjacent node types are Network Node, End Node, Learn Node, and Virtual Routing
Node (VRN).