Visara LINCS Central Control - Manual (Page 73)

67
Chapter 8. Media Management Menu
707024-002
disks as necessary. To use Copy Disk, the LINCS node must have at least two disk
drives. If you are copying from hard disk, you must specify which subdirectory (Disk
Type) to be copied, since the hard disk cannot be copied all at once.
Copy Data Objects
Copy Data Objects LINCS C8.2 Central Control
Disk Type: System
Source Disk Drive: A
Destination Disk Drive: C
PF: 1-Menu 10-Process
After selecting a disk type and disk drives, and pressing PF10, the catalog for the Source
disk will be displayed.
Disk Type
This is a toggle field which allows one to select the type of disk that data will be copied
from. LINCS currently supports disk types of:
• System
• Central Site Library
• Backup
• Trial (Merge)
• Record/Playback
• Dumpdisk (Dumpdks1-Dumpdsk9)
• DSL
Source Disk Drive
Toggle to choose the disk drive from which data objects will be copied.
Destination Disk Drive
This is a toggle field which allows one to chose the disk drive to which data objects will
be copied.
Disk Catalog
This panel is shown when you press PF10-Process from the Copy Data Objects panel.
Disk Catalog/A:System LINCS C8.2 Central Control
C State Rel IL Date Time Canonical Name (note, @ = 1174.NA)
_ Prod C1.0 3050 01/20/94 15:00 [email protected]
_ Prod C1.0 3050 01/01/94 12:00 [email protected]
_ Sent C1.0 3050 xxxxxxxx xxxxx [email protected]
_ Trial C1.0 3050 xxxxxxxx xxxxx [email protected]
_ Prod C1.0 3050 xxxxxxxx xxxxx [email protected]
_ Prod C1.0 3050 xxxxxxxx xxxxx [email protected]
_ Prod C1.0 3050 xxxxxxxx xxxxx [email protected]
Commands: C=Copy Data Object to: Drive C
PF: 1-Menu 3-Return 7-Back 8-Forw 10-Process
To copy a data object to the Destination disk, enter C or c prior to the data object entry and