Visara LINCS Central Control - Manual (Page 118)

112
LINCS Central Control
707024-002
Display/Update Line Counters
This panel provides a display of various interface statistics.
IP Router Line Counters: TRC1 LINCS C8.2 Central Control
IN interface bytes: 00000000 IN pkts with unknown prot: 00000000
Unicast pkts delivered: 00000000 IN err-free pkts discarded: 00000000
IN Broadcasts or multicasts: 00000000 IN pkts delivered up stack: 00000000
IN pkts discarded/no error: 00000000 OUT IP pkts originating local: 00000029
IN pkts containing errors: 00000000 OUT err-free IP pkts discard: 00000000
IN pkts with unknown prot: 00000000 IP pkts discarded/no route: 00000000
OUT interface bytes: 00000000 IP Fragments need reassembly: 00000000
OUT unicast pkts: 00000000 Failures in IP reassembly: 00000000
OUT broadcast/multicast pkts: 00000029 IP pkts fragmented here: 00000000
OUT pkts discarded/no error: 00000000 IP pkts unable to fragment: 00000000
OUT pkts discarded/with error: 00000000 IP fragments created: 00000000
OUT pkts in queue: 00000000 Routing pkts discarded: 00000000
IN ICMP msgs: 00000000 RIP bad pkts received: 00000000
IN ICMP msgs/with errors: 00000000 RIP bad routes: 00000000
OUT ICMP msgs: 00000000 RIP updates sent: 00000000
OUT ICMP msgs/with errors: 00000000 Total Heap (bytes): 00272756
IN IP pkts: 00000000 Available Heap (bytes): 00228372
IN pkts discarded/header err: 00000000
IN pkts discarded/bad addr: 00000000
IN forwarded pkts: 00000000
PF: 1-Menu 4-Clr_Ctrs 7-Back 8-Forw 9-Refresh
Restart Router
This command restarts the IP Router if it is configured. The current router table is cleared and
is repopulated as routing information is received from the network.
TCP/IP Stack Trace
The TCP/IP Stack Trace allows you to trace and view a trace that is taken internal to the IP
stack used by LINCS. The trace does not automatically run, so you must configure it and start
it if you want a trace. If the LINCS platform is dumped while the trace is running, the trace
will be included in the dump. To conserve on space in the trace buffer (allow the trace to
include data for longer periods of time) there is a lot of control over what gets traced. Eleven