Visara LINCS Central Control - Manual (Page 110)

104
LINCS Central Control
707024-002
Line Errors
Count of errors that may occur. Some example errors are:
• a frame is repeated
• the Error Detected Indicator (EDI) in the incoming frame is zero
• or a Frame Check Sequence (FCS) error exists
Burst Errors
Count of the times the adapter detects the absence of transitions on the line for a selected
period of time.
ARI/FCI Errors
Address Recognized Indicator/Frame Copied Indicator. Count of the times the adapter received
a frame it had previously transmitted but the ARI or FCI is zero, indicating frame not recognized
or copied by the destination.
Lost Frame Errors
Count of the times an adapter fails to receive the end of frame it previously transmitted.
Receive Congestion Errors
Count of the times an adapter recognizes a frame with its address but insufficient buffer space
prevents reception of the frame.
Frame Copied Errors
Count of the times an adapter recognizes a frame with its address but the ARI bit has already
been turned on. This may indicate a duplicate ring address.
Token Errors
Counter in the Active Monitor station. Incremented only when:
• A priority token has the Monitor Count bit set to one. Indicates the token is not being received.
• A frame has the Monitor Count bit equal to one. Indicates the token is not being received.
• No token or frame is received within a 10-ms window. Code violation exists in the
Starting Delimiter/token sequence.
DMA Bus Errors
Occurrences of DMA bus errors.
DMA Parity Errors
Occurrences of DMA parity errors.
Line Statistics HSC
Line Statistics LINCS C8.2 Central Control
Line: HSC1.0 Slot: 07
Successful Receptions 493
Invalid Length Frames Received 0
Frame Alignment Errors 0
Aborts Received 0
Frame Check Sequence Errors 0
Discarded Frames 0
Receive Overruns 0
Successful Transmissions 5404
Transmit Underruns 0
CTS Lost During Transmission 0
PF: 1-Menu 4-Clr_Ctrs 7-Back 8-Forw 9-Refresh