Visara LINCS Central Control - Manual (Page 45)

39
Chapter 4. ASCII Definition Utility
707024-002
Define Display Emulation Selection
The Display Emulation Selection Panel is displayed when an ASCII Device powers on if the
device is configured as Prompt for Display Emulation. This panel allows one to define which
ASCII display types will be displayed on the Display Emulation Selection Panel.
A one character data entry field precedes each ASCII display type. By placing an asterisk in
this field, the display type will appear on the Display Emulation Selection panel which is
displayed when an ASCII device is powered on.
By default, all predefined displays will appear on the Display Emulation Selection panel.
Define Display Emulation Selection LINCS C8.2 Central Control
_ 1.DEC VT1xx * 16.IBM 3161,3162,3163 * 31.WYSE 50
_ 2. User Defined Display 2 * 17. IBM 3164 * 32.IBM 3151
_ 3. User Defined Display 3 * 18. ADDS Viewpoint A2 * 33.VT3270/2
_ 4. User Defined Display 4 * 19. ADDS Viewpoint 78 * 34.VT3270/3
_ 5. User Defined Display 5 * 20. Esprit Executive 10/78 * 35.VT3270/4
_ 6. User Defined Display 6 * 21. Hazeltine 1500 * 36.VT3270/5
_ 7. User Defined Display 7 * 22. Hewlett-Packard 2621B
* 8. DEC VT52 * 23. Lear Siegler ADM 11
* 9. DEC VT1xx * 24. Lear Siegler ADM 12
* 10.DEC VT2xx, 7 bit * 25. Lear Siegler ADM 3A, ADM 5
* 11.DEC VT2xx, 8 bit * 26. Lear Siegler ADM 1178
* 12.DEC VT320, 8 bit * 27. TeleVideo 912
* 13.FTTERM Color * 28. TeleVideo 950
* 14.FTTERM Mono * 29. TeleVideo 970
* 15.IBM 3101 * 30. WYSE 60
* = display will appear on Display Emulation Selection panel
PF: 1-Menu 9-Default 10-Done
The next panel brings us to the ADU Complete panel.
ADU Complete
When PF10-Done is pressed from any ADU panel, the ADU Complete panel is displayed as follows.
ADU Complete LINCS C8.2 Central Control
System Disk Drive: C
Specify IML Options: No
Data Object Name: ________
PF: 1-Menu 7-Back 10-Save
Pressing PF10 will save the ADU updates to the chosen system disk.
After saving, you will return to the Customization main menu.
Data Object Name
This field allows you to define a name that uniquely identifies the ADU data object for
transmission by the Central Site Change Management Utility. The specified name will become
the 7th token in the data objects canonical name. If no name is specified, the 7th token of the
canonical name will be the release level of the System Microcode which is being used to
define the data object.
The name may contain up to eight alphanumeric characters (except for the first character
which must be alphabetic) with no embedded blanks. Note that the names ALL, WC, and
LOCALCHG are reserved and cannot be used.