Visara LINCS Central Control - Manual (Page 15)

9
Chapter 2. APPN COS Menu
707024-002
Five Predefined APPN COSs
#BATCH
This COS name maps to a mode name of the same name. It is a general, batch-oriented class
of service that uses low transmission priority. High bandwidth and low cost are considered
more important than short delay.
#BATCHSC
Same as _#BATCH, except that a minimum security is required.
#INTER
This COS name maps to a mode name of the same name. It is a general, interactive-oriented
class of service that uses high transmission priority. Short delay is considered to be more
important than high bandwidth and low cost.
#INTERSC
Same as _#INTER, except that a minimum level of security is required.
#CONNECT
This class of service provides connectivity at medium transmission priority, for LU-LU
sessions. _#CONNECT equates to a mode name of all blanks.
APPN Mode-COS Correlation
The mode name identifies a set of session parameters for an LU-LU session. It is used as an
index into a “mode name to COS” table. The predefined mode names correspond to the COS
names. When a mode name is specified, a COS name must also be specified and vice versa.
All mode names must be unique to all other mode names, and they must be consistent
throughout the network.
APPN Mode-COS Correlation LINCS C8.2 Central Control
Mode Name COS Name:
01 #BATCH__ #BATCH__
02 #BATCHSC #BATCHSC
03 #INTER__ #INTER__
04 #INTERSC #INTERSC
05 #CONNECT
06 ________ None
.
.
16 ________ None
PF: 1-Menu 7-Back 8-Forw 9-Default 10-Done
The first five Mode names are standard and are protected. You can enter up to eleven mode
names, but CPSVCMG and SNASVCMG are reserved.